Get Quote

Borong Machinery Manufacturing CO. LTD

News

  • What is the N95 masks?
    N95 mask body fitting machine, also known as mask tablet pressing machine, is a machine used for fully automatic production of finished multi-layer flat masks. It can use 1~4 layers of N95PP spunbond non-woven activated carbon and filter material. Material to nose wire insertion, edge banding and cutting of the finished product are all automated operations in one line. The flat mask production equipment has stable performance, high output, low defect rate and convenient operation. The mask body machine plus several inner ear band mask machines, outer ear band mask machines, bandage mask machines or ear band spot welding machines can produce various types of masks such as inner ear band masks, outer ear band masks, bandage masks, etc.

    2022 02/25

  • How to distinguish N95 and KN95 in the mask machine
    Customers often ask whether N95 masks and KN95 masks are produced by a mask machine? is not different. Let`s look at the remarks from professional analysis to experts. The difference between kn95 masks and n95 masks is mainly due to the different standards they meet: kn95 masks are masks that meet the requirements of my country`s GB2626 standard, where [GB" refers to the national standard, and the standard is non-oily The particle filtration efficiency is greater than or equal to 95%; the n95 mask is a mask that meets the US NIOSH certification standard, and the standard is also the non-oily particulate filter efficiency greater than or equal to 95%. " Expert Zhu Renyi also said that KN95 masks are our country's masks with particle filtration efficiency, and N95 masks are actually a test of the United States, so these two are because of different countries, it may use this The code name is different! KN95 masks and N95 masks are actually the same in terms of particle filtration efficiency, but what should be paid attention to here? It is what we call medical protective masks for medical staff, especially for direct contact with new coronary pneumonia. In fact, it is one of the N95 masks, but not all N95 masks are medical protective masks, not all masks. The machine can produce medical masks.

    2022 02/15

  • What is the specific standard for N95 masks?
    "N" means "not resistant to oil". "95" means that the particle concentration inside the mask is 95% lower than the particle concentration outside the mask when exposed to the specified number of special test particles. Among them, the value of 95% is not the average value, but the minimum value, so the average value of actual products is mostly set above 99%. Other anti-particulate mask levels certified by NIOSH include: N99, N100, R95, R99, R100, P95, P99, P100, these protection levels can cover the protection range of N95, where "R" means, suitable for oily or non-oily Particulate, if used for oily particulate protection, the use time should not exceed 8 hours; "P" means, suitable for oily or non-oily particulates, if used for oily particulates, the use time should follow the manufacturer's recommendations. And "99" and "100" refer to the filtration efficiency level, respectively. It is divided into "N", "R", and "P" according to oil resistance, and "95", "99" and "100" according to the capture rate. "R" means "resistant to oil", "P" means "oilproof", "99" in the catch rate means more than 99%, and "100" means more than 99.7%. In addition, when N100, P100, and R100 three-type masks are tested with 0.3 micron particles, the barrier efficiency must reach more than 99.7%. above 95%. Therefore, N95 masks are tested with 0.3 micron sodium chloride particles, and the barrier rate must be more than 95%. When the wearer's face is tested for tightness, it is ensured that the air can enter and exit through the mask when it is close to the edge of the face. Only those who meet this test are issued an N95 certification number. At present, there is a certain gap between the testing methods of domestic protective masks and foreign testing methods. Generally speaking, protective masks that have passed the existing domestic standard certification cannot yet reach the N95 level standard.

    2022 02/06

  • Advantages and scope of electric forklift
    Three major advantages of electric forklift First,the electric forklift is high. The performance of the electric forklift is very familiar with and effectively solves the high-altitude operation, and it can also make more fast and efficient mobile, stacking, and more safe and effective for all kinds of large-scale, large weight products. The release of our artificial operations, solves many shortcomings in artificial operations, let our operators, can easily and efficiently complete related production homework. The forklift has a high performance, suitable for all kinds of warehouses, logistics, and freight industries, all play a very important role. Second, the electric forklift is simple. High-quality electric forklift, operation is also very simple, no special staff, separate operation, the use of the forklift is more simple, our operators only need to make a full-end understanding of the use of the forklift, you can Easily get started, let all users can perform related operations. Simple and safer. Third, the electric forklift covers a small area. The most important feature of the electric forklift is that it is different from some large devices, covering a smaller area, suitable for our ordinary merchants. With the use of forklifts, the forklift rental industry, interest, professional company, providing the highest quality forklift, solves the actual problems of many small and medium-sized businesses. Application range of electric forklifts: electric forklift can be used for storage, mechanical, chemical, textile, printing, logistics, medical, etc. Work efficiency.

    2022 01/20

  • Introduction of electric forklift
    Electric forklifts generally have electric drive during use, which is simple and convenient to operate, easy to load and unload, high in efficiency, fast in transportation capacity, and small in number of users. One person can complete the whole process with low noise and high safety. The operation control of electric forklift is simpler and more flexible. Internal combustion forklifts are bulky and cumbersome to operate. The electric forklift is small in size and much lighter in operation than the internal combustion forklift. Its electric steering system, acceleration control system, hydraulic control system and braking system are all controlled by electrical signals, which greatly improves work efficiency.

    2022 01/12

  • Introduction to the advantages of all-electric forklifts
    Because of its simple and flexible operation and control, the operating intensity of electric forklifts is much lighter than that of internal combustion forklifts. Its electric steering system, acceleration control system, hydraulic control system and brake system are all controlled by electric signals, which greatly reduces In this way, the labor intensity of the operator is greatly improved, which is very helpful to improve the work efficiency and accuracy of the work. Compared with internal combustion forklifts, the advantages of low noise and no exhaust emissions of electric vehicles have also been recognized by many users. In addition, there are some technical reasons for choosing electric forklifts. The rapid development of electronic control technology makes the operation of electric forklifts more and more comfortable, the wider the scope of application, and the more and more solutions to logistics. From these aspects, the market demand for electric forklifts will certainly grow faster and faster, and the market share of electric forklifts will also become larger and larger.

    2022 01/03

  • Merry christmas and best wishes for a happy new year!
    The name Christmas is short for Christ's Mass.A Mass is a kind of Church service.Christmas is a religious festival.It is the day we celebrate as the birthday of Jesus.There are special Christmas services in Christian churches all over the world.But many of the festivities of Christmas do not hane anything to do with religion.Exchanging gifts and sending Christmas cards are the modern ways of celebrating the Christmas in the world.

    2021 12/25

  • Congratulations to our newly designed electric forklift
    Our newly developed electric forklift finally has a finished product. A new type of electric forklift. An electric forklift refers to a forklift that uses electricity, and most of it works with batteries. A storage battery is a battery whose function is to store a limited amount of electrical energy and use it in a suitable place. Its working principle is to convert chemical energy into electrical energy. This battery is installed in the battery of an electric forklift. It should be noted that the battery is best not to be placed horizontally! Advantages of the new electric forklift: 1. The operation and control of electric forklift is simple and flexible. 2. The electric steering system, acceleration control system, hydraulic control system and brake system are all controlled by electric signals, which greatly reduces the labor intensity of the operators. 3. We have perfect after-sales service, systematic machine training, and timely delivery of orders. So don't worry about buying.

    2021 12/04

  • The current situation of COVID-19
    Globally, as of 5:41pm CEST, 21 September 2021, there have been 228,807,631 confirmed cases of COVID-19, including 4,697,099deaths, reported to WHO. As of 20 September 2021, a total of 5,776,127,976 vaccine doses have been administered.

    2021 09/22

  • Congratulations on Our New Designed KN95 Mask Making Machine
    After three months of unremitting efforts, our company's newly developed KN95 mask making machine finally has a finished product. The new face mask machine adopts all-steel structure, which has high production efficiency and stability. It can reach 120-130 pcs in one minute at present. Advantages of new KN95 mask making machine: 1. More simple and user-friendly, new operation system is easy for workers to operate. 2. This is our new design full automatic KN95 mask making machine, it adopts full steel frame which is more stable and more durable. 3. Control system is pneumatic + bus servo and all the key structural parts use servo control. That ensured equipment`s faster and high productivity. 4. We do have perfect after-sales service, systematic training for machine using and timely delivery of orders. So there is no worries for purchasing.

    2021 08/31

  • The current situation of new coronary pneumonia at home and abroad
    According to CNN, on August 7, local time in the United States, the delta strain of the mutated new crown virus once again caused the worsening of the new crown epidemic in the United States. At the same time, Johns Hopkins University has compiled data on the diagnosis of new coronary pneumonia in the United States. As of August 6, the average number of new cases per day in the United States has exceeded 107,140 in seven days. This also means that both domestic and foreign Still fighting against new coronary pneumonia. With the recurrence of the epidemic, many people worry that the new crown virus will make a comeback, so let's first look at the data on the number of confirmed new crown pneumonia at home and abroad. First of all, starting from the domestic, according to the real-time big data report of the new crown virus pneumonia epidemic, as of August 12, there are currently 3,812 confirmed cases in my country, and there are currently 3 suspected cases. Relatively speaking, this data is relatively safe in China. Everyone is taking good care of protection and don't be overly anxious. Secondly, let's talk about foreign countries. According to the real-time big data report of the new crown virus pneumonia epidemic, as of August 12, there are 16681674 confirmed cases in foreign countries, with a total of 205,454,523 confirmed cases and a total of 4332110 deaths. At present, the epidemic situation in foreign countries is still relatively serious, especially in the United States, so if you can go abroad less, go abroad less.

    2021 08/15

  • Features and operating procedures of steel bar bending machine
    The steel bar bending machine belongs to the improvement of the steel bar bending structure. It is mainly composed of a mechanical part and a control part. The main components of the mechanical part are composed of a steel bar feeding mechanism, a steel bar bending mechanism and a steel bar cutting mechanism; the control system is mainly composed of a programmable controller, a contact relay, and a switching power supply. Features and operating procedures of steel bar bending machine, its characteristic is in the structure: the two-stage brake motor and the reducer are directly connected for one-stage reduction; the small gear and the large gear mesh. Two-stage deceleration; the big gear always drives the curved disk surface to rotate; the curved disk surface is provided with a central shaft hole and a plurality of bending shaft holes; the working multiple positioning shaft holes are respectively set on the positioning square rod of the desktop. Since the two-stage brake motor and the reducer are directly connected for one-stage deceleration, the input and output speed ratio is accurate, the bending speed is stable and accurate, and the electrical automatic control can be used to change the speed. Brake can ensure the bending angle. The steel bars are bent in both directions by the forward and reverse rotation of the motor. 1. Check whether the mechanical performance is good, the workbench and the bending machine table are kept level. 2. Install the stop shaft or variable stop according to the diameter of the processed steel bar and the requirements of the bending machine 3. Check that the stopper and the turntable should be free from damage and cracks, and the operation can only be performed after the empty machine is running. 4. During operation, insert one end of the steel bar that needs to be bent into the gap provided by the turntable, and the other end is fixed against the fuselage. Check that the fuselage is fixed and it is indeed installed on the side that blocks the steel. 5. It is strictly forbidden to change the angle and adjust the speed during the operation, nor to refuel or remove. 6. When bending steel bars, it is strictly forbidden to process steel bars that exceed the diameter, number of bars and mechanical speed specified by the machine. 7. It is strictly forbidden to stand people within the working radius of the steel bar bending machine and on the side of the fuselage that is not fixed. The bent semi-finished products should be stacked neatly, and the hooks should not face upwards. Features and operating procedures of steel bar bending machine. 8. When the turntable is reversed, it must be carried out after it has stopped. 9. The work is completed, the box is shut off, the equipment is cleaned, and the site sanitation.

    2021 06/22

  • Introduction to the advantages of the automatic steel bar bending machine
    1. It is composed of two sets of horizontal and vertical straightening wheels that can be actively adjusted, combined with 4 traction wheels, and driven by imported servo motors to ensure the best accuracy of steel straightening. 2. Zigzag and shearing organization: Driven by imported servo motor, the zigzag arm can be rotated and elastic at high speed, and the shearing organization can complete the shearing action at high speed to ensure the bending accuracy of the steel bar. 3. Control system: The machine adopts foreign mature control system with high reliability. The control system has fault identification and alarm functions. Can design up to 60 corners of any shape of ancient and modern and contour graphics, can store more than tens of thousands of different product shapes, and has a storage graphics library for mass production of multiple varieties. Products of any shape can be produced continuously without mechanical adjustment; there is no need to stop processing when correcting the tortuous angle. Comparison of traditional processes: The traditional processing technology of stirrups is generally to use a single machine to process the coiled steel bars through the processes of modulation, cutting, and bending to complete the distribution. Its technology is relatively backward and cannot meet the needs of modern construction schedules, and it wastes a lot of talents, takes up a lot of space, uses a lot of labor, low production rate, and poor dimensional accuracy and shape accuracy of stirrups. The CNC bending machine adopts advanced computer digital control to automatically and quickly complete the straightening, length setting, bending and cutting of steel bars. This machine is extremely efficient and can replace 20-30 rebar workers. It is unique in the field of rebar processing and serves major road and bridge companies, China Railway, China Construction, municipal engineering, large rebar processing and distribution units, construction sites and private small processing plants.

    2021 06/15

  • Introduction of automatic CNC steel bar bending machine
    The CNC steel bar bending machine has the advantages of low equipment failure rate, fast bending speed, low energy consumption without damaging ribs, low noise and light vibration; it has the characteristics of high efficiency, application, and reliable operation. The operation is light and sensitive, and it is easy to move. It is accustomed to the production of stirrups in large-scale construction units and steel processing plants; it is highly efficient and can produce 4-6 tons per day. The cut-to-length is accurate and suitable for large-scale and factory-based operations. It has a wide range of angle adjustments. It can be adjusted arbitrarily at 0-180 degrees, can bend square, trapezoidal stirrups and U-shaped hooks, suitable for the processing of stirrups in construction, bridges, tunnels, prefabricated components and other projects.

    2021 05/10

  • Numerical Control Steel Bar Bending Hoop Machine
    Our Numerical Control Steel Bar Bending Hoop Machine has below technology advantages: Equipped with manual traction device to make the initial feeding of steel bars convenient; Use pneumatic tightening and telescopic functions to make the reaction faster and more reliable; Intelligent fault identification and alarm system for easy maintenance; The central axis does not move, and the bidirectional bending function can be used to process various special-shaped stirrups; Adopt international advanced synchronous transmission mode, low maintenance cost and low failure rate; Equipped with graphic storage function, greatly reducing the difficulty of operation for workers; Double-wire bending hoop system, which can greatly improve work efficiency.

    2021 04/23

  • Hunan Metro launches smart mask supply machine
    Changsha Metro will fully launch the smart mask machine, and each person will receive one free per day. In order to implement the requirements of epidemic prevention and control work, effectively prevent and actively respond to the new crown pneumonia epidemic, and solve emergency situations such as passengers forgetting to wear masks, Changsha Metro will install free smart and convenient mask machines in all stations of the line from now on. Currently, there are 23 subways on Line 2. All stations have been installed, and all other lines will be installed and put into use in the near future.

    2021 03/09

  • Global Epidemic Updates
    Worldometers real-time statistics show that as of 13:59 on November 3, Beijing time, the cumulative number of confirmed cases of new coronary pneumonia worldwide has exceeded 47.32 million, reaching 47,327,309, and the cumulative number of deaths has exceeded 1.211 million, reaching 1,211,425 example. The cumulative number of confirmed cases of new coronary pneumonia in the United States is the largest in the world, exceeding 9.56 million, reaching 9,567,543; the cumulative number of deaths has exceeded 236,000, reaching 236,997.

    2020 11/03

  • The second outbreak of the global epidemic has kicked off
    As the temperature in the northern hemisphere turns cooler and autumn and winter arrive, the number of new cases in a single day in many European countries continues to record highs. In Asia, the epidemic in India, Nepal and other countries is worrying, while the number of new cases in the United States in a single day has been hovering at a high level. Based on many factors, the fall and winter rebound of the new crown epidemic has begun, and the second wave of epidemic has begun. At present, the amount of virus accumulated in European and American countries is very large, which is also an important factor in the daily increase of cases. Another reason is that European and American countries' daily testing capabilities are also improving, resulting in an increase in reported confirmed cases. In the absence of large-scale clinical application of vaccines, the number of cases continues to rise, and the trend of a second outbreak of the epidemic is inevitable. People should be vigilant, strengthen preventive measures, and take responsibility for their lives and health.

    2020 10/12

  • Large amount mask machines in stock
    Our company specializes in the development and production of mask machines. In response to the global COVID-19, our company independently developed and produced mask machines to help people all over the world tide over this crisis. The COIVD-19 in China is now under control. Our company has a large stock in stock, and can customize production according to customer requirements. If you need it, please feel free to communicate with us. Our company will definitely help. Simon, Whatsapp / Phone: +8613730129723, Email: borong00@outlook.com

    2020 09/18

  • Features of Mask Machine from Borong
    We have various kinds of Popular Face Mask Making Machine, it can produce 3ply Face Masks Machine and 5ply Face Masks Machine. Surgical Mask Machine Fully Automatic. Besides, we also have Flat Type Face Mask Machine For Surgical Use, Meltblown Fabric Slitting And Rewinding Machine and other machine for mask production. All our machines have below features: Ⅰ. Fully automatic feeding system: 1. Aluminum alloy frame, sturdy and beautiful, to ensure the precise size of the finished product; 2. Stainless steel fixture, adjustable left and right; 3. The tension wheel is set to adjust the tension of the fabric width, so as to effectively ensure the beauty and flatness of the finished product; 4. Independent nose line delivery group, convenient for adjustment and maintenance; after the nose line is inserted, the positioning point is positioned, thereby effectively ensuring the accuracy of the nose line position and the stability of the nose line. Ⅱ. Folding forming system: 1. Two-fold folding device, high folding accuracy and easy control, 2. Large diameter welding wheel can effectively reduce product deformation. Ⅲ. Ultrasonic heat sealing system: 1. Titanium alloy mold When most mask machinery manufacturers use aluminum alloy, Lijin mask machine has provided and actively advocates customers to use titanium alloy molds, because compared with aluminum alloys, it is easy to oxidize and burst, which is not suitable for long-term rush operations and use. Short life and other shortcomings, the advantages of titanium alloys are obvious: A. Good toughness, suitable for long-term vibration; B. The heat/ultrasonic conductivity is strong, thus ensuring the beautiful welding and cutting effect of the product; C. High hardness, not easy to crack, deform and rust; D. Although its cost is about ten times different from that of aluminum alloy, from the perspective of overall production efficiency, the choice of titanium alloy mold is obviously better than aluminum alloy. 2. Imported ultrasonic transducer, 20K international frequency standard, the output is more powerful and stable; plus two sets of ultrasonic systems, effectively guarantee the welding quality of the product. 3. The PLC program controls the action of the whole machine to reduce the operating difficulty of the user. Ⅳ. The whole machine has stable performance, continuously adjustable production speed, high production efficiency, up to 60 pieces per minute, convenient and accurate counting, high raw material utilization, simple and convenient operation and adjustment, high degree of automation, and effective reduction of labor costs.

    2020 09/16

SEE MORE

Email to this supplier

-
SEND

Browse by: All Products | China Suppliers Service is provided by Bossgoo.com

Copyright © 2008-2024 Bossgoo Co., Ltd. All rights reserved.

Your use of this website constitutes acknowledgement and acceptance of our Terms & Conditions